Characterization of minerals, metals, and materials 2018 - Bai, Chenguang; Brown, Andrew; Carpenter, John S.; Escobedo-Diaz, Juan P.; Firrao, Donato; Goswami, Ramasis; Hwang, Jiann-Yang; Ikhmayies, Shadia; Kalay, Yunus Eren; Kim, Jeongguk; Li, Bowen; Li, Jian; et al. (Cham Springer, 2018)
Part 1. Characterization Methods -- On FIB Milling Parameters -- Part 2. Characterization of Ceramics -- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag -- In-situ XRD Investigation of Bauxite Dehydroxylation -- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery -- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production -- Part 3. Characterization of Non-ferrous Metals -- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery -- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature -- Part 4. Microstructure and Performance of Materials -- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina -- Part 5. Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. Analysis of Surfaces and Interfaces -- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces -- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method -- Intergranular Cracking of High Strength Alloyed Brass Rods -- Part 8. Mechanical Behaviors of Materials -- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining -- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel -- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets -- Part 9. Characterization of Powder Materials -- Characterization of HPGR Pre-treated Sinter Feed -- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite -- Study on Application of Iron Ore Fine in Pelletizing -- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts -- Part 10. Mineral Processing and Analysis -- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India -- Humic Acid-based Silica Composite Aerogels--A Preliminary Study -- Characterization of Non-covalently Functionalized Halloysite -- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria -- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay -- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation -- Part 11. Nanostructure and Characterization of Materials -- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption -- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites -- Part 12. Thermal Processing and Analysis -- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel -- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy -- Characterization of Coke-making Coals of High Reactivity from Northwest China -- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt -- Part 13. Poster Session -- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties -- Adhesion Study at Advanced Ages in Multipurpose Mortars -- Applications and Opportunities of Nanomaterials in Construction and Infrastructure -- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel -- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry -- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber -- Clay Smectite Synthetic: Characterization and Application in Nanocomposites -- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints -- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues -- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites -- Evaluation of the Quality of Concrete with Waste of Construction and Demolition -- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties -- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric -- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler -- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams -- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design -- Influence of the Blocks and Mortar's Compressive Strength on the Flexural Bond Strength of Concrete Masonry -- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure -- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites -- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric -- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black -- Mineralogical Analysis of A Chrome Ore from South Africa -- Pilot Trial of Detoxification of Chromium Slag in Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt -- Preparation of Refractory Material from Ferronickel Slag -- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate -- Research on the Interaction of Humic Acid with Iron Minerals -- Study of Different Process Additives Applied to Polypropylene -- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray -- Study of the Incorporation of Residue of Ornamental Rocks in Ceramic Tiles -- Study of the Incorporation of Smectite in Powder Coating -- Study of the Mineralogical Composition of the Tailings of Coscotitlâan, Hidalgo, Mexico -- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams -- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais.
Electronic reproduction.
Keywords: Engineering -- Materials; Materials science; Structural materials; Electronic books